Half Lid Opening Ute Toolboxes
A 3/4 side opening toolbox has a door over the upper part of the front and a fixed panel below it, so the door opens above your tray sides. You can reach your tools without dropping them. We at OZY Toolbox stock half lid toolboxes from 1200mm to 2100mm in raw, white and black, with or without drawers. Shop online and compare sizes, finishes and stock across our Sydney, Brisbane and Perth warehouses.
Half Lid Aluminium Toolbox - Black 1700mm x 600mm x 820mm, 3/4 Side Opening Toolbox
- NSW In Stock
$1,339.00
Half Lid Aluminium Toolbox - Checker Plate 1700mm x 600mm x 820mm, 3/4 Side Opening Toolbox
- NSW Sold Out
$1,229.00
Half Lid Aluminium Toolbox - Checker Plate 2100mm x 600mm x 820mm, 3/4 Side Opening Toolbox
- NSW In Stock
$1,389.00
Half Lid Aluminium Toolbox - Flat Plate 1700mm x 600mm x 820mm, 3/4 Side Opening Toolbox
- NSW In Stock
$1,229.00
Half Lid Aluminium Toolbox - White 1700mm x 600mm x 820mm, 3/4 Side Opening Toolbox
- NSW In Stock
$1,339.00
Half Lid Toolbox with 3 Drawers - Black 1700mm x 600mm x 820mm, 3/4 Side Opening Toolbox
- NSW In Stock
- QLD In Stock
- WA Sold Out
$1,899.00
Half Lid Toolbox with 3 Drawers - Flat Plate 1700mm x 600mm x 820mm, 3/4 Side Opening Toolbox
- NSW Sold Out
- QLD Sold Out
- WA Sold Out
$1,749.00
Half Lid Toolbox with 3 Drawers - White 1700mm x 600mm x 820mm, 3/4 Side Opening Toolbox
- NSW Pre-OrderETA: 10 December
- QLD Sold Out
- WA Sold Out
$1,899.00
Half Lid Aluminium Toolbox - Black 1400mm x 600mm x 820mm, 3/4 Side Opening Toolbox
- NSW Sold Out
$1,129.00
Half Lid Aluminium Toolbox - White 1400mm x 600mm x 820mm, 3/4 Side Opening Toolbox
- NSW In Stock
$1,129.00
Half Lid Toolbox with 2 Built-in Drawers - Black 1400mm x 600mm x 820mm, 3/4 Side Opening Toolbox
- NSW In Stock
- QLD In Stock
- WA Sold Out
$1,639.00
Half Lid Toolbox with 2 External Drawers - White 1400mm x 600mm x 820mm, 3/4 Side Opening Toolbox
- QLD In Stock
- WA Sold Out
- NSW In Stock
$1,639.00
NEW
Half Lid Aluminium Toolbox - Flat Plate 2100mm x 600mm x 820mm, 3/4 Side Opening Toolbox
- NSW Pre-Order
$1,389.00
Why You Should Opt for Half Lid Toolbox for Your UTE
Half lid, half door and 3/4 side opening are three names for the same design: a door that lifts on gas struts over the upper part of the box, with a fixed panel underneath. That panel is what sets a half door toolbox apart. It sits behind your tray sides, so the door clears them, and it stops loose items sliding out when you open the door on a slope. If you'd rather open the whole front, compare our full side opening toolboxes.
The half-door design provides easy access without requiring full opening, allowing you to quickly grab your tools. This design also helps keep their tray sides intact while providing full opening capabilities when needed. Many users recommend using this feature for added convenience when working on-site.Designed for ease of use, the half side opening toolbox gives quick access without having to remove items from the ute tray.
Every half lid aluminium tool box we sell is fully seam welded and locks with whale tail compression locks, keyed alike with four keys supplied. That keeps your tools and equipment secure on site and on the road.
Half Lid Toolbox Features and Dimensions
Our half lid toolboxes can be securely installed and mounted easily. You can fit one yourself, or add basic or premium flush-mounted installation when you order. With proper installation, the box handles heavy loads without shifting.
The half lid aluminium toolboxes are designed to store various items, from work tools to camping gear. Whether you are looking for a toolbox for sale to use for professional or personal purposes, the adjustable shelf options and spacious interior make them suitable for multiple storage needs.
Every half lid toolbox in our range is 600mm deep and 850mm or 820mm high, in four lengths: 1200mm, 1400mm, 1700mm and 2100mm. Choose raw aluminium in a flat plate or checker plate, or a powder-coated white or black finish to match your ute.
3/4 With Drawers
Our half lid toolboxes with drawers fit two, three or four drawers into the fixed lower section, under the door. Each drawer runs on heavy-duty slides rated to 50kg, so small tools, fixings and fittings stay sorted and easy to find. Because the drawers sit low in the box, below the top of most tray sides, you'll need to drop the tray side to open them. The door above still opens as normal, giving you the main compartment and an adjustable shelf. You can check out all the drawer models here.
3/4 without drawers
Without drawers, the whole box is one open compartment with an adjustable shelf, and the door opens above the tray sides. You can reach your tools directly without dropping the tray side, which saves time at every stop. This half opening toolbox suits larger items like drop saws, tool cases and extension leads that won't fit in a drawer.
With 2, 3 and 4 drawer options as well as open-compartment models, you can find the right half door ute toolbox for your tray. Get in touch today to learn more about shipping, freight, depot pickup options, and fast delivery. Get in touch today to learn more about shipping, freight, and depot pickup options, and fast delivery.
Contact Us to Decide on the Best 3/4 Side Opening Toolbox for Your UTE
Not sure whether drawers or an open compartment suits your work? Send us your tray measurements, the height of your tray sides and a list of what you carry, and we'll recommend the right model. Call 1300 699 269, email sales@ozytoolbox.com.au, or book a visit to our Castle Hill showroom to see a half door tool box in person.
FAQs
Can I get a custom half-lid toolbox for my UTE?
We have a wide range of aluminium toolboxes that cover almost all of the standard ute needs. If you require custom toolboxes for trays or side opening toolboxes, we can arrange it. Just contact our sales team at sales@ozytoolbox.com.au.
What are the standard dimensions of a 3/4 side opening toolbox?
Each ute will require a different dimension toolbox to suit the user's needs. Our side opening toolboxes have a standard width of 600mm and a standard height of 850mm or 820mm. We find this works well for a majority of our customers as the width allows room for larger items like drop saws and the height remains under their ladder racks.
Can I get a return on the half door toolbox setup for my ute?
OZY Toolbox center prioritises customer satisfaction over anything else. We will happily assist you with any exchanges and returns of ute toolboxes according to our return policy.
Will the door on my 3/4 side opening toolbox open with my tray sides up?
Yes, we have designed our 3/4 side opening toolboxes specifically for the purpose of being able to access your tools without the hassle of dropping your tray sides. Our 3/4 side opening toolboxes are suitable for all standard ute trays. On models with drawers, you'll still need to drop the tray side to open the drawers.
Is half lid toolbox lockable?
Yes, they are lockable for maximum security. Each one is fitted with whale tail compression locks, keyed alike, so one key opens every lock and your tools stay safe at all times.







