Ute Toolboxes with Drawers

41 Products Found

Keep your tools and equipment organised with one of our OZY Toolboxes with built-in drawers. Coming in a variety of sizes, styles and finishes, all of our aluminium ute toolboxes with built-in drawers come standard with whale tail compression locks.

This provides added security, thick weather proof seals to keep your gear nice and dry, full-length stainless steel piano hinges and gas strut assisted doors. Powder coated black, white and flat plate aluminium along with checker plate aluminium options available. Choose a ute toolbox with drawers from 1400mm to 2400mm long, with two, three or four drawers.

Why Choose Our Ute Toolbox with Drawers

Keep your tools and equipment organised with one of our OZY Toolboxes with built-in drawers. Coming in a variety of sizes, styles and finishes, all of our aluminium boxes with built-in drawers come standard with whale tail compression locks.

A toolbox with drawers gives small tools a place of their own, so you're not digging through the main compartment for a socket or a box of screws. Toolbox drawers slide out to show everything at once and latch shut before you drive off. Above the drawers you still get an open compartment and an adjustable shelf for power tools, cases and leads. If you open the same drawer tool box twenty times a day, ute toolbox drawers save time on every job.

Choose by Size

Every tool box with drawers in our range is 600mm deep, in five lengths. The 1400mm suits compact setups and narrower trays and leaves room for other gear alongside, while the 1500mm checker plate model works on smaller trays or when you want spare tray space. The 1700mm fits most standard single and dual cab ute trays and is our most common size. For larger trays and full-size utes that need more storage, choose the 2100mm, and for the full tray width, trucks and wide trays, go to the 2400mm.

Choose by Number of Drawers

Pick a 2 drawer toolbox for light kits and everyday essentials, as it separates your basic tools without taking up the whole box. A 3 drawer tool box suits a growing kit with a mix of hand and power tools, and it's the most common layout in our range. A 4 drawer tool box gives a full trade kit organised storage for a working setup.

Features & Build

Every aluminium toolbox with drawers in our range shares the same core build, whichever size or finish you choose.

  • Aluminium construction: Our newest drawer models are fully welded from 2.5mm 5052 marine-grade aluminium, with reinforced side walls and roof. The rest of the range is fully seam welded from flat plate or checker plate aluminium, so the frame stays rigid with a full set of aluminium toolbox drawers loaded inside.
  • Drawer slides: Our toolbox drawers run on heavy-duty slides rated to 50kg each. Drawers pull out smoothly even when full, and close firmly so they stay put on rough roads.
  • Whale Tail locks + keys: Every model locks with whale tail compression locks, keyed alike so one key opens every lock. External drawer models have a lock on each drawer, and 12V central locking is available as an option.
  • Full weather and dust seals: Cushioned rubber seals around the door keep out rain and road dust, and our newer models add drain points in the lid. Your tools stay dry on wet worksites and dusty tracks.
  • Gas struts on the lid: Two gas struts lift the lid and hold it open, leaving both hands free for your ute toolbox drawers and shelf. On our newer models, each strut is rated to 200N.

Internal and External Drawers

Internal toolbox drawers sit inside a full lid toolbox, behind the door, either stacked to one side or in a row along the bottom. Depending on the model, they open with a key lock or a push-to-open touch latch, and the full lid keeps them sealed and locked when the door is shut.

External drawers sit on half lid and 3/4 side opening toolboxes, in the fixed lower section below the door, with their own whale tail locks. You can open them without lifting the lid, but on most trays you'll need to drop the tray side first. Inside any drawer, a toolbox drawer organiser or foam insert keeps sockets and bits in place. Looking for aluminium drawers that sit on the tray floor instead? See our trundle drawers and drawer units.

Take Your Ute to the Next Level with Our Tool Box with Drawers

OZY’s range of drawer toolboxes is the ultimate solution for any professional tradesperson or DIY enthusiast looking to upgrade their ute tool or truck with a tool box with drawers. Whether you're in the market for a 2 drawer, 3 drawer or 4 drawer setup, our products are designed to accommodate a wide range of others power and hand tools, keeping your workspace tidy and accessible.

These high-quality boxes are ideal for your tray, workshop, or trolley, and are a must-have for any industrial or professional setting. Choose from full lid or 3/4 side opening, aluminium checker, or flat finishes for added durability, style, and functionality. Every ute drawer tool box ships Australia-wide, or you can collect from our Sydney, Brisbane or Perth warehouse.

FAQs

Will a toolbox with drawers fit my ute tray?

+

Most likely. Each drawer tool box in our range is 600mm deep and comes in lengths from 1400mm to 2400mm, so measure the usable width of your tray between the rails and pick the length that leaves room for anything else you carry. The 1700mm suits most standard single and dual cab trays. If you're unsure, send us your measurements and we'll confirm.

Can you make a custom tool box with a drawer for my ute?

+

We have a wide range of aluminium drawer toolboxes that covers almost all of the standard ute needs. But if you require custom toolboxes, we do make them in bulk.

Do these products come with a warranty?

+

Yes, all ourwarrantytoolboxes with drawers come with a 24-month warranty to ensure peace of mind. As a trusted brand, we back the durability and functionality of every tool box, chest, and cabinet we sell.Whether you’re storing Sidchrome, GearWrench or Milwaukee tools, you can trust our range of tool storage to perform under pressure.

What weight can each aluminium drawer tool box hold?

+

Our drawer toolboxes are designed to be heavy duty and can hold substantial weight per drawer, ideal for professional use. Depending on the size and style, each drawer can typically accommodate up to 30-50kg of tools and equipment, making them perfect for your UTE, truck, or trundle setup. Check the specifications of each unit to find the right fit for your needs.